1. Make sure thereโs a brief Title for the lab, and your Name is listed at the top.2. Write out a short Abstract summarizing what you accomplished in the lab and what you thought it was about. Only 3-4 sentences are needed.3. Write out a brief section labeled Mathematical Models, which should include any relevant equations or physical relations/conceptsused in the lab. 4. Write out a brief section labeled Statistical Methods, which should include a brief explanation of any tools you used to handle uncertainty/error in the lab.5. In a section called Physical SystemsandData include tables with all the data you collected in the lab, along with explanations of what this data represents(what systems they refer to or what experiment you set up to collect it).6. Finish with a section called Conclusions. Put the conclusions you made from the lab here.IT should answer any questions posed to you in the procedure.Lab 5: Energy Conservation (Online Version)
What do we do in this lab?
This lab has three parts:
A. Collect data on the energy of a mechanical system at different times using a simulation
B. Use propagation of uncertainty, weighted average, and the t-test to check if the law of conservation of energy is supported by your data
C. Repeat the experiment for a different mechanical configuration to examine the generality of the concept.
Equipment: PhET Simulation, Microsoft Excel
Key Concepts: Mechanical Energy, Conservation of Energy, Weighted Average, Propagation of Uncertainty, t-test.
Safety concerns: None.
Part A. Mechanical Energy
Last week we began investigating the study of motion by developing and testing models that were based on Newtonโs laws. In particular we relied on Newtonโs Second Law: ๐นโ=๐ ๐โ
An equation like this one is usually called an equation of motion. If we solve the equation of motion for a system, weโll know everything about its subsequent motion.
But thereโs another method that physicists often use to understand the dynamics of systems which is useful when we donโt need to know every detail of the dynamics of a system or if the equation of motion is too difficult to solve. This method relies on what are called constants of motion.
For example, for a mechanical system one important constant of motion is the total mechanical energy: ๐ธ=12๐๐ฃ2+๐(๐ฅโ)
Where ๐ is the potential energy which depends on position. The idea is that no matter how the object moves this quantity remains constant. Even if the motion is extremely complicated the quantity will remain the same and can provide us useful information on its dynamics.
A1. Open the simulation:
https://phet.colorado.edu/sims/html/energy-skate-park-basics/latest/energy-skate-park-basics_en.html
Select โintroโ. You should see a parabolic ramp and a skateboarder. This is the system weโll use to investigate energy conservation. The only external force the skateboarder is subject to is that of the earthโs gravitational field. The potential energy is ๐=๐๐โ where โ is the height. So the total energy is:
๐ธ=12๐๐ฃ2+๐๐โ
A2. Try placing the skateboarder somewhere inside the parabolic ramp. You will notice that no matter where you place the skateboarder on the ramp, in subsequent motion the skateboarder always remains stuck inside the ramp (and never flies up over the edge). Why is this? Explain using energy conservation. Hint: what would the minimum energy need to be to get over the edge of the ramp?
A3. Check the โspeedโ button and โgridโ so we can measure distances and speeds. You may treat the boxes as having sides of 1 meter. We have ๐=9.81 ๐/๐ 2. The speedometer is not labeled, so please see below for the correct labels:
A4. We also do not know the mass of the skateboarder. However, you may know from class that in Newtonian mechanics mass is also a constant of motion. Because in this case it shows up the same way in both the kinetic and potential energies, and because it is also conserved, we can set it equal to anything we want and it wonโt affect our investigation. In other words: ๐ธ๐=12๐ฃ2+๐โ
is also a constant of motion. This is a manifestation of something called the equivalence principle, which you may also learn about in class.
For sake of this experiment letโs choose ๐=1๐๐.
A5. Place the skateboarder on the ramp again. From time to time, pause the simulation and measure the velocity and height, rounding as needed and keeping track of the corresponding uncertainty. Try to do this so that you get a variety of different positions/speeds.
Do this at least 5 times in order to complete a table like this one (but make sure to include units):
For the final column youโll want to use the propagation of uncertainty formula found in the prelab activity (instead of just sig figs): ฮ๐ธ=โ(๐๐ฃฮ๐ฃ)2+(๐๐ฮโ)2
Where again we will treat ๐=1๐๐.
In the next section weโll examine if the assertion that total mechanical energy is conserved is supported by your data. SpeedSpeed UncertaintyHeightHeight UncertaintyEnergyEnergy Uncertainty
Part B. Energy Conservation
How can we determine if your data supports energy conservation? We need to determine a single value and uncertainty for the energy and see if itโs indistinguishable from each individual measured value.
B1. Average Energy and Uncertainty
Although this will depend somewhat on which points you chose in Part A, youโll probably notice that the uncertainties in the final column are not all the same due to the way uncertainty propagates from ๐ฃ and โ through to ๐ธ (compare this to what would happen if we relied only on sig figs and youโll see why sig figs can be misleading).
This means we must use a weighted average instead of a regular average. Using your 5+ data points, determine a weighted average for the energy and the related uncertainty:
๐ธ๐๐ฃ๐๐๐๐๐ ฮ๐ธ๐๐ฃ๐๐๐๐๐
Compare this uncertainty to the uncertainties in your final column. It should be smaller. This is an example of how multiple measurements improve precision.
B2. Energy Conservation
Energy conservation means the energy should not be (distinguishably) different at different moments in time. Use the t-test to compare each data point, which represents a different moment in time, with your average value and uncertainty.
Does your data support the conservation of energy?
Part C. Generalizing Energy Conservation
Hopefully you found in Part B that energy was conserved. But how do we know if this isnโt a special case due to the special parabolic shape of the ramp? Supposedly energy conservation should apply no matter how arbitrarily complicated the ramp shape is. Letโs check this.
C1. Go to โPlaygroundโ:
Make your own ramp with at least 6 red spots. Shape it any way you want. Make sure โFrictionโ is set to โNoneโ (Weโll save worrying about friction next lab).
C2. Repeat the experiment from Parts A and B to see if energy is still conserved. Take a screenshot of your setup to include in your lab report.
C3. If you were to pick yet another shape for the ramp, would you feel justified asserting energy would still be conserved? Why or why not?
Science is the pursuit and application of knowledge and understanding of the natural and social…
Clearly stating the definition, the values, the meaning of such values and the type of…
All answered must be typed using Times New Roman (size 12, double-spaced) font. No pictures…
All answered must be typed using Times New Roman (size 12, double-spaced) font. No pictures…
https://www.npr.org/sections/ed/2018/04/25/605092520/high-paying-trade-jobs-sit-empty-while-high-school-grads-line-up-for-university Click on the link above. Read the entire link and answer the questions below…
All answered must be typed using Times New Roman (size 12, double-spaced) font. No pictures…