1. Make sure there’s a brief Title for the lab, and your Name is listed at the top.2. Write out a short Abstract summarizing what you accomplished in the lab and what you thought it was about. Only 3-4 sentences are needed.3. Write out a brief section labeled Mathematical Models, which should include any relevant equations or physical relations/conceptsused in the lab. 4. Write out a brief section labeled Statistical Methods, which should include a brief explanation of any tools you used to handle uncertainty/error in the lab.5. In a section called Physical SystemsandData include tables with all the data you collected in the lab, along with explanations of what this data represents(what systems they refer to or what experiment you set up to collect it).6. Finish with a section called Conclusions. Put the conclusions you made from the lab here.IT should answer any questions posed to you in the procedure.Lab 5: Energy Conservation (Online Version)
What do we do in this lab?
This lab has three parts:
A. Collect data on the energy of a mechanical system at different times using a simulation
B. Use propagation of uncertainty, weighted average, and the t-test to check if the law of conservation of energy is supported by your data
C. Repeat the experiment for a different mechanical configuration to examine the generality of the concept.
Equipment: PhET Simulation, Microsoft Excel
Key Concepts: Mechanical Energy, Conservation of Energy, Weighted Average, Propagation of Uncertainty, t-test.
Safety concerns: None.
Part A. Mechanical Energy
Last week we began investigating the study of motion by developing and testing models that were based on Newton’s laws. In particular we relied on Newton’s Second Law: 𝐹⃗=𝑚 𝑎⃗
An equation like this one is usually called an equation of motion. If we solve the equation of motion for a system, we’ll know everything about its subsequent motion.
But there’s another method that physicists often use to understand the dynamics of systems which is useful when we don’t need to know every detail of the dynamics of a system or if the equation of motion is too difficult to solve. This method relies on what are called constants of motion.
For example, for a mechanical system one important constant of motion is the total mechanical energy: 𝐸=12𝑚𝑣2+𝑈(𝑥⃗)
Where 𝑈 is the potential energy which depends on position. The idea is that no matter how the object moves this quantity remains constant. Even if the motion is extremely complicated the quantity will remain the same and can provide us useful information on its dynamics.
A1. Open the simulation:
https://phet.colorado.edu/sims/html/energy-skate-park-basics/latest/energy-skate-park-basics_en.html
Select “intro”. You should see a parabolic ramp and a skateboarder. This is the system we’ll use to investigate energy conservation. The only external force the skateboarder is subject to is that of the earth’s gravitational field. The potential energy is 𝑈=𝑚𝑔ℎ where ℎ is the height. So the total energy is:
𝐸=12𝑚𝑣2+𝑚𝑔ℎ
A2. Try placing the skateboarder somewhere inside the parabolic ramp. You will notice that no matter where you place the skateboarder on the ramp, in subsequent motion the skateboarder always remains stuck inside the ramp (and never flies up over the edge). Why is this? Explain using energy conservation. Hint: what would the minimum energy need to be to get over the edge of the ramp?
A3. Check the “speed” button and “grid” so we can measure distances and speeds. You may treat the boxes as having sides of 1 meter. We have 𝑔=9.81 𝑚/𝑠2. The speedometer is not labeled, so please see below for the correct labels:
A4. We also do not know the mass of the skateboarder. However, you may know from class that in Newtonian mechanics mass is also a constant of motion. Because in this case it shows up the same way in both the kinetic and potential energies, and because it is also conserved, we can set it equal to anything we want and it won’t affect our investigation. In other words: 𝐸𝑚=12𝑣2+𝑔ℎ
is also a constant of motion. This is a manifestation of something called the equivalence principle, which you may also learn about in class.
For sake of this experiment let’s choose 𝑚=1𝑘𝑔.
A5. Place the skateboarder on the ramp again. From time to time, pause the simulation and measure the velocity and height, rounding as needed and keeping track of the corresponding uncertainty. Try to do this so that you get a variety of different positions/speeds.
Do this at least 5 times in order to complete a table like this one (but make sure to include units):
For the final column you’ll want to use the propagation of uncertainty formula found in the prelab activity (instead of just sig figs): Δ𝐸=√(𝑚𝑣Δ𝑣)2+(𝑚𝑔Δℎ)2
Where again we will treat 𝑚=1𝑘𝑔.
In the next section we’ll examine if the assertion that total mechanical energy is conserved is supported by your data. SpeedSpeed UncertaintyHeightHeight UncertaintyEnergyEnergy Uncertainty
Part B. Energy Conservation
How can we determine if your data supports energy conservation? We need to determine a single value and uncertainty for the energy and see if it’s indistinguishable from each individual measured value.
B1. Average Energy and Uncertainty
Although this will depend somewhat on which points you chose in Part A, you’ll probably notice that the uncertainties in the final column are not all the same due to the way uncertainty propagates from 𝑣 and ℎ through to 𝐸 (compare this to what would happen if we relied only on sig figs and you’ll see why sig figs can be misleading).
This means we must use a weighted average instead of a regular average. Using your 5+ data points, determine a weighted average for the energy and the related uncertainty:
𝐸𝑎𝑣𝑒𝑟𝑎𝑔𝑒 Δ𝐸𝑎𝑣𝑒𝑟𝑎𝑔𝑒
Compare this uncertainty to the uncertainties in your final column. It should be smaller. This is an example of how multiple measurements improve precision.
B2. Energy Conservation
Energy conservation means the energy should not be (distinguishably) different at different moments in time. Use the t-test to compare each data point, which represents a different moment in time, with your average value and uncertainty.
Does your data support the conservation of energy?
Part C. Generalizing Energy Conservation
Hopefully you found in Part B that energy was conserved. But how do we know if this isn’t a special case due to the special parabolic shape of the ramp? Supposedly energy conservation should apply no matter how arbitrarily complicated the ramp shape is. Let’s check this.
C1. Go to “Playground”:
Make your own ramp with at least 6 red spots. Shape it any way you want. Make sure “Friction” is set to “None” (We’ll save worrying about friction next lab).
C2. Repeat the experiment from Parts A and B to see if energy is still conserved. Take a screenshot of your setup to include in your lab report.
C3. If you were to pick yet another shape for the ramp, would you feel justified asserting energy would still be conserved? Why or why not?
Why Work with Us
Top Quality and Well-Researched Papers
We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.
Professional and Experienced Academic Writers
We have a team of professional writers with experience in academic and business writing. Many are native speakers and able to perform any task for which you need help.
Free Unlimited Revisions
If you think we missed something, send your order for a free revision. You have 10 days to submit the order for review after you have received the final document. You can do this yourself after logging into your personal account or by contacting our support.
Prompt Delivery and 100% Money-Back-Guarantee
All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.
Original & Confidential
We use several writing tools checks to ensure that all documents you receive are free from plagiarism. Our editors carefully review all quotations in the text. We also promise maximum confidentiality in all of our services.
24/7 Customer Support
Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.
Try it now!
How it works?
Follow these simple steps to get your paper done
Place your order
Fill in the order form and provide all details of your assignment.
Proceed with the payment
Choose the payment system that suits you most.
Receive the final file
Once your paper is ready, we will email it to you.
Our Services
No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.
Essays
No matter what kind of academic paper you need and how urgent you need it, you are welcome to choose your academic level and the type of your paper at an affordable price. We take care of all your paper needs and give a 24/7 customer care support system.
Admissions
Admission Essays & Business Writing Help
An admission essay is an essay or other written statement by a candidate, often a potential student enrolling in a college, university, or graduate school. You can be rest assurred that through our service we will write the best admission essay for you.
Reviews
Editing Support
Our academic writers and editors make the necessary changes to your paper so that it is polished. We also format your document by correctly quoting the sources and creating reference lists in the formats APA, Harvard, MLA, Chicago / Turabian.
Reviews
Revision Support
If you think your paper could be improved, you can request a review. In this case, your paper will be checked by the writer or assigned to an editor. You can use this option as many times as you see fit. This is free because we want you to be completely satisfied with the service offered.